Chimes- How to craft
To get started you will need ten ceramic pots. They should be around 1 ¼ inch to 1 ¾ inch. The other things you need will be wood, varnish paint and time’s six plates and screws of 5/8 inch., Beads made of wood and spool, wire up to 20 yardsticks.
How to make Chimes:
On the wooden plate add a coat of varnish, allow them to dry and continue adding coat of varnish. Screw the grommet 5/8 screw into the plate. If you want to add more screws add them few inches apart. Cut your line measuring lengthwise.
Once you finish the step, run another line measuring lengthwise through your beads of wood and fasten so that it forms a dual bond. You can use adhesive to fasten the area if you feel.
Take the other vessel to create the chimes, threading them and regulate the measurement lengthwise. Here you can add the grommet 7/8 screws to hand the chimes. Use the wire outlined in this article to hang the chimes.
The chimes are finished. Now you will get some tips on crafting snakes to place beneath the lower areas of the door so as to keep the wind out during winter.
Get a strong textile weaver fabric or corduroy, thread to coordinate with the fabric will be required. In addition, to you will need stuffing dry beans, and rice. You may need adhesive and felt in any color.
Next, trim the fabric up to 10 inches wide and 6 inches lengthwise. Measure your door before cutting the fabric. Use two parts of the outer regions or your fabric, gather and hand or machine sew 3 sides around 3/8 inch away from the edge of the fabric. Conceal the seams and add the stuffing. Turn the edges and then stitch them and choose additives to design the snake.
For that you can use glues, buttons, studs etc to make eyes. You can also use felt to make the lips, tongue and surrounding features about the eyes as lids or brows.
The snakes can make a good gift also. You can craft few to give your friends as well you can keep them around to keep it warm in the winter.
Source : www.craftarticle.com
0 comments:
Post a Comment